Auto Draft

When was the final time the roof of one’s building was inspected? If it has been awhile, the roof may have problems lurking that need immediate attention. Some roof problems cause obvious signs such as leaks, while others produce subtle signs which are only detectable at first glance. In either case, leaving the problems unaddressed can cost you a small fortune once you finally repair them. If the roof on your building has any of the problems listed below, an organization that specializes in commercial roofing should repair them quickly:

Buckled Panels

Roof panels buckle because of weather damage and poor installation. Whatever the cause, the buckling allows wind to blow within the panels, making them loose. As the problem worsens, the panels start to fall off, often coming off in large sections when a storm hits. Buckled panels are probably one of the most commonly fixed problems by companies that perform roof repair.

Expended Screw Holes

Expanded screw holes are another problem for panel roofs. Over time, wind and fluctuating temperatures cause the screw holes in panels to widen around the screws that hold the panels set up. This creates a space where water can leak within the panels and soak the roof deck. After the deck becomes saturated, the thing is costly to fix.

Blistering

Improper heating procedures and dry lapping cause hot bituminous roof systems to blister. Although small blisters seldom pose an issue, large ones can rupture and allow water to seep under the bitumen. Once the blisters form, hot weather typically makes them worse. Due to the humid subtropical climate in some regions of the united states, commercial roofing frequently experiences blistering.

Ponding Water

Blocked drains and improper sloping could cause water to assemble in small ponds on a roof. Repairing a blocked drain is simple, but fixing a sloping problem is more complex. Often, installing a taper insulation system to establish a new slope is a good solution. Through the rainy season, resolving ponding water is one of the most common forms of roof repair.

Loose Flashing

Flashing prevents water from seeping in the crevice where in fact the roof abuts to protrusions such as for example chimneys and vents. As time passes, most flashing must be resealed. If it is not, leaks may cause serious damage the deck and building interior. Most flashing problems are corrected during scheduled maintenance.

Missing Mortar

Chimneys and high elements of brick walls that have sections of missing mortar may cause leaks. These leaks tend to be recognised incorrectly as leaks in the roof membrane, but an intensive inspection by way of a company that focuses on commercial roofing will reveal the real problem. Roofing Companies Lafayette La Most parts of missing mortar could be repaired with basic tuck pointing procedures.

Conclusion

The problems above are a few of the most common known reasons for roof repair. When they are corrected early, most problems are cheap to fix, however, not addressing them until they cause serious problems may necessitate roof replacement. Having a scheduled maintenance agreement with a roofing company is the best solution to ensure problems are detected early.